w w w . t j e e n a . s e

The digital life of Jörgen Larsson

Fiero modifications

Here are some writeups and a list of the modifications I’ve made to my Fiero.

Suspension

  • SS Brake hoses
  • Rodneys upper adjustable balljoints
  • Rodneys 1″ lowering balljoints
  • Moog Camber adjustment kit on the rear
  • KYB Shocks and struts
  • Intrax lowering springs in front
  • FieroAddiction rear coilover kit with 300 springs on KYB’s
  • Prothane Poly bushings on the whole suspension and cradle
  • Rear 22 mm sway bar with Energy Suspension greasable poly bushings and end links
  • Rodneys Poly Engine & transmission mounts
  • SS Performance Dogbone

Body/interior

  • Dietmar Side Scoops
  • Dietmar Taillightpanel with 4 x round Hella lamps and Painless LED flasher.
  • Trans Am fender vents
  • Fiero Shop International Stage 2 Hood scoop extractor type
  • 79 Mustang decklid scoop
  • DueMila Shine 17×8.5″ Rims
  • Kahines tinted quarter windows
  • Antenna and hole in fender removed
  • Timo dual headlight buckets with Hella projector lights & Xenon High beams
  • Decklid gas shocks, torsion bars removed
  • DIY_Stu’s Outer dew wipes
  • Shortshifter
  • Vaccuum gauge
  • Hurst shifter knob (black)
  • FieroStore floor mats from Lloyd Mats, black with silver “Fiero GT”
  • GT wing removed and holes filled

Engine

  • 3.4L Camaro block
  • Ported heads with 3 angle valve job & stainless valves
  • Performance Cam
  • Crane 1.6 Roller Rockers
  • High performance waterpump
  • Rodneys V6 Idler Pulley
  • MSD Blaster Coil
  • Newer type distributor (Cardone)
  • EGR system removed and deleted from memcal
  • Rodneys Stant 180 degree thermostat
  • Rodneys Low Temp Radiator Fan Switch
  • Rodneys magnetic oil plug
  • K&N open airfilter in the left scoop
  • K&N oil filter with FilterMAG
  • TB preheat removed
  • Taylor ThunderVolt 8.2 mm silicone spark plug wires
  • Ported 56mm throttle body with half shaft mod
  • Ported upper, middle and lower intake
  • Welded and ported cermakrome coated headers with ARP studs & FelPro gaskets
  • ALDL kit
  • Ultrasonic cleaned Rochester 180cc/min injectors with new baskets and o-rings
  • Nitrous Oxide Systems Sniper Wet EFI 75HP
  • 2 x Magnaflow dual 3″ slanted with rolled edge tail pipes
  • FieroStore SS cat delete down pipe, heat wrapped
  • Custom stainless Y-pipe

Plus countless of repairs and small upgrades I’ve forgotten about.